The moving, detachable mowing device with draw-in roller of the Claas Lexion 480 combine harvester can be tilted up and locked in position. The straw chopper can also be tilted up and the grain pipe swivels out. The grain bin flap and hatch opens, the rotation filter swivels upwards and the detachable mowing device can be towed by the enclosed trailer.
The snap-down stabiliser gives the secure support. The big bale press has cord bins that can be opened.
The service flap with press mechanism can also be opened. The hay rake is driven in drive mode where two hay bales can be automatically transported to the discharge chute. The hay bale chute can be tilted up in two stages by chains.
MODEL: BR2017The John Deere Big Bale Press is suitable for all Bruder 1:16 tractors, sold separately.
Sold Out - $49.00 $55.00
Cattle trailer including 1 cow.
The animals can be led into the trailer via the folding rear ramp and fed through the side door.
It also features detachable roll bars and lowerable support leg with crank.
Sold Out - $69.00 $75.00
The off-road front axle can be steered directly via the steering wheel in the driver's cab.
The engine bonnet can be opened to reveal the engine block. It also has a detachable front weight with hoisting mechanism.
Authentic tread tyres complete the picture.
Combine with other Bruder implements to bring farming to life!
Size: 27 x 17 x 17 cm
The Fendt 209 S is a 'compact' tractor with reduced horsepower and smaller vehicle dimensions/weights, and is used in the vineyard or on grassland farms for upkeep work and generally in confined or in hilly conditions.
This model features a detachable front loader, and steerable and off-road suspension front axle as well as tread tyres.
An additional steering rod allows steering through the sliding tractor roof, and this model comes with a front loader attachment.
The BRUDER Fliegl Three way tipping trailer is one of a kind in the toy segment. The front of the trailer has a sliding control for the innovative tipping unit. If you move the control lever to the left, the trailer tips to the left; if you move it to the right, the trailer tips to the right. If you move the lever into the middle, it only allows the trailer to be tipped backwards. Then set the direction with the control lever and the trailer can only be tipped in that direction. Openable sides attached at the top also form part of a three way dumper. The side lock is as simple to operate as the tipping mechanism. There is a sliding lock under the sides on the left, right and back. A little jerk in the open direction is all that is needed and the side is already released. The top edges can also be removed. As a result of which the sides can also be opened conventionally with a pivot below on the platform.
The pick-up roller of the Pöttinger forage trailer moves during travel. The side hatchway can be opened, the ladder folded down and the roof clamps and ropes (included) can be taken off. The dispensing rolls are driven by operating the crank handle.
The Pöttinger forage trailer is suitable for all Bruder 1:16 scale tractors (not included).
The Krone trailer totary tedder with separate running gear sets the new standard when it comes to grassland cultivation.
Thanks to its specially developed beam design, it can also be combined with small tractors and used to cultivate operating widths that are particularly wide.
The beam holding the implements can be folded in several places and the road carriage that is folded up during work in the fields can be swivelled down.
This ensures quick and safe transport on the road from the work site to the farm and vice versa.
The model sets itself apart by its individually powered implements which counter-rotate in pairs just as in the original.
Colour coding of the counter-rotating implements
Road carriage can be swivelled down for transport
Implement beams can be folded into two segments per side
A hay tedder is a machine used in haymaking. It is used after cutting and before windrowing, and uses moving forks to aerate or fluff up the hay and thus speed-up the process of hay-making. The use of a tedder allows the hay to dry better, which results in improved aroma and color.
This type of plough is used for treating soil in farming.
The rotary gear that can be pivoted by 180 degrees makes the plough very agile despite its substantial size and can also be used in hilly and rough terrain without any problems. The large castor wheels minimise soil pressure when ploughing and ensure secure transporting on roads.
This plough fits superbly to the Bruder 1:16 scale tractors.
Farmers who primarily prescribe to the keeping of farm animals need robust tools that deliver maximum capacity day in day out for harvesting animal foodstuff.
This front mower can be attached to tractors and lowered and raised separately. It also has a rotating conditioner via a direct drive system.
Size: 19 x 15.5 x 9cm
For use on with the Claas Forage Harvester (BR2131) as a separate attachment to collect up those crops.
Size: 23 x 11.5 x 9 cm
Sold Out - $99.00 $125.00
Land Rover Defender with Horse box and horse.
The Land Rover comes with transparent plastic front windscreen and rear side windows, opening engine bonnet to show engine detail, realistic swing out prop to latch open the bonnet, opening side and rear doors.
The front wheel steering is easily controlled by the additional steering column, and it has front and rear wheel suspension, removable drawbar coupling and rolling wheels with tyre tread detail.
The Horse box has an opening side door, drop down ramp and lowerable support leg with crank.
Supplied with one horse.
Size: 60 x 12 x 18 cm
The Claas Atles 936 RZ really represents the state of the art as far as large-scale tractors from Renault are concerned.
This model comes with a fully glazed cabin and the cabin door can be opened. The tractor can be steered through the top of the cabin.
There is also an option to re-equip with twin tyres.
Shovel front loader for retrofitting.
The shovel front loader is easy to attach to the tractor by clip-on after removing the front weight.
This front loader can be fitted to all tractors of the Bruder 3000 series (sold separately).
A quad bike combines the fun of a motorcycle with the flexibility of an off-road vehicle.
They are used in forestry, agriculture, on construction sites or for recreational use.
This toy quad bike has front and rear suspension and also working front-wheel steering.
There is a removable luggage rack, trailer coupling and tool holders.
Included with the quad bike is a Bworld driver figure with helmet and protective clothing. The figure is jointed in the arms and legs and the head can also move.
Size: 16 x 9.3 x 9.3 cm
A bundle of products - the John Deere 6920 tractor with front loader (BR2052) and Green Tipping trailer (BR2210).
The Bruder Claas Nectis Tractor with Front Loader and Trailer, is ready to load up and cart farm feed from the silage pits to the paddocks.
This sturdy plastic tractor unit is detailed to be just like a real Claas tractor set.
The slot opening on the roof of the cab allows for a spare steering wheel to be inserted and attached to the existing steering wheel, allowing steering the pivoting wheels externally. The trailer has an opening tail gate and dual wheel base to carry extra heavy loads.
The John Deere Gator 855D is a truly versatile machine. Whether agricultural, support vehicle, forestry, municipal work or construction sites. This combination of efficient utility vehicle and compact size make it extremely versatile and useful.
Sold Out - $15.00 $19.00
This set of 4 round bales is the perfect accessory for any of our farming equipment.
Two of the bales are wrapped.
The BRUDER model is distinguished by its rich-in-detail design and brings the same powerful earth moving capacity to the sandpit that the original offers in real life. Thanks to its sturdy construction and a design that keeps the loaded goods perfectly centred, the vehicle's centre of gravity remains in the middle and guarantees a level of driving stability that cannot be achieved with box-shaped bodies. Boasting a visual appeal that is second to none, the model takes advantage of this arrangement as well thanks to the multi-step ratchet.
The Cambridge agricultural roller is very easy to unfold for action and provides an operating width of 450mm. After the job is done, the rollers are just as easy to fold up for safe, on-road transport. The agricultural rollers' special ring profile facilitates off-road operation and a stabiliser is available to securely park the equipment.